論文 - 國吉 直
-
OpenFOAMを用いたエジェクタ冷凍サイクル性能評価の検討
國吉直,伊藤瑶姫,笹原滉大,小嶋満夫 , 2024年03月
日本機械学会関東支部第30期総会講演会予稿集
-
R1336mzz(Z)を用いたエジェクタ冷凍サイクルの実験結果とその他の低圧冷媒を用いた場合の性能比較
笹原 滉大,伊藤 瑶姫,國吉 直, 小嶋 満夫,寺島 康平,佐藤 春樹 , 2023年09月
2023年度日本冷凍空調学会年次大会講演論文集
-
Experimental Assessment on the Performance Difference between R245fa and R1224yd(Z) as the Working Fluid of an Ejector Refrigeration Cycle
Tamaki ITO, Nao KUNIYOSHI, Mitsuo KOJIMA, Kohei TERASHIMA, Haruki SATO , 2023年08月
Proceedings 26th IIR International Congress of Refrigeration
-
Possibility of Cooling Using PV/T Solar Panels with an Ejector Refrigeration Cycle
Kohei Terashima, Tamaki Ito, Nao Kuniyoshi, Mitsuo Kojima, Tatsuo Nagai, Haruki Sato , 2023年08月
Proceedings 26th IIR International Congress of Refrigeration
-
Experimental Consideration of a Transpiration Cooling System using Porous Ceramics for a Measure against Urban Heat Island Phenomena
Miho Saitoh, Mitsuo Kojima, Nao Kuniyoshi, Kohei Terashima, Haruki Sato , 2023年08月
Proceedings 26th IIR International Congress of Refrigeration
-
Current Results of Our Experimental Development of an Ejector Refrigeration System Using Environmentally Friendly Working Fluids
Nao Kuniyoshi, Tamaki Ito, Kodai Sasahara, Mitsuo Kojima, Kohei Terashima, Haruki Sato , 2023年07月
Proceedings of International Workshop on Environmental Engineering
-
多孔質セラミックスからの蒸散による水冷却性能試験
齋藤美帆,渡邊万里子,小嶋満夫,國吉直,寺島康平,佐藤春樹 , 2023年03月
第56回空気調和・冷凍連合講演会講演論文集
-
環境に配慮した冷媒R1336mzz(Z)を用いたエジェクタ冷凍サイクルに関する性能試験
笹原滉大,伊藤瑶姫,國吉直,小嶋満夫,寺島康平,佐藤春樹 , 2023年03月
第56回空気調和・冷凍連合講演会講演論文集
-
PV/Tソーラーパネルとエジェクタ冷凍サイクルを組み合わせた太陽エネルギー利用システムの検討
寺島康平,長井達夫,佐藤春樹,小嶋満夫,國吉直,門倉輝,伊藤瑶姫 , 2022年11月
2022年度日本太陽エネルギー学会研究発表会講演論文集
-
作動流体R245faあるいはR1224yd(Z)を用いた場合のエジェクタ冷凍サイクル性能の検討
伊藤瑶姫,國吉直,寺島康平,小嶋満夫,佐藤春樹 , 2022年09月
2022年度日本冷凍空調学会年次大会講演論文集
-
自然環境に優しい冷媒R1224yd(Z)によるエジェクタ冷凍サイクルの性能試験結果
伊藤瑶姫,國吉直,寺島康平,小嶋満夫,佐藤春樹 , 2022年04月
第55回空気調和・冷凍連合講演会講演論文集
-
多孔質セラミックスによる蒸散冷却装置開発のための基礎計測結果
齋藤美帆,國吉直,寺島康平,小嶋満夫,佐藤春樹 , 2022年04月
第55回空気調和・冷凍連合講演会講演論文集
-
60℃程度の低温熱源利用を目的としたエジェクタ冷凍サイクルの運転特性
國吉 直, 佐藤 悠, 佐藤 春樹, 寺島 康平, 小嶋 満夫 , 2020年
2020年度日本冷凍空調学会年次大会講演論文集
-
Possibility of Ejector Cycle for Cooling in SDGs
N. Kuniyoshi, A. Takatsuka, H. Sato, M. Kojima , 2019年06月
Proceedings of International Workshop on Environmental Engineering 2019
-
Possibility of Porous Ceramics Cooling Device in SDGs
K. Terashima, K. Hakamata, H. Sato, N. Kuniyoshi, M. Kojima , 2019年06月
Proceedings of International Workshop on Environmental Engineering 2019
-
Study of Interaction between Unsteady Supersonic Jet and Vortex Rings Discharged from Elliptical Cell
K. Ueda, H. Fukuoka, N. Kuniyoshi, M. Yaga, E. Ueno, T. Takiya, N. Fukuda , 2019年01月
IOP Conference Series: Materials Science and Engineering
-
Study of Interaction between Unsteady Supersonic Jet and Vortex Rings Discharged from Elliptical Cell
Kazumasa Kitazono, Hiroshi Fukuoka, Nao Kuniyoshi, Minoru Yaga, Eri Ueno, Naoaki Fukuda, Toshio Takiya , 2018年01月
Material Science Forum , 910 , 137 - 142
-
Numerical Simulation of Interaction between Supersonic Flow and Backward Inclined Jets Surrounded by Porous Cavity
Nao Kuniyoshi, Minoru Yaga , 2017年10月
Open Journal of Fluid Dynamics , Vol.7, No.3 , 276 - 287
-
Numerical Simulation of Interaction between Supersonic Flow and Backward Inclined Jets Surrounded by Porous Cavity
Nao Kuniyoshi, Minoru Yaga , 2017年10月
Proceedings of the 13th International Symposium on Experimental Computational Aerodynamics of Internal Flows , 1 - 7
-
An interaction between shock wave and vortex induced by small volume high pressure shock tube
M. Yaga, T. Maekawa, H. Fukuoka, N. Kuniyoshi , 2017年10月
Proceedings of the 31st INTERNATIONAL SYMPOSIUM ON SHOCK WAVES , 0 - 0
-
An interaction between shock wave and vortex with straight shock tube and elliptical cell
Minoru Yaga, Tomonori Maekawa, Hiroshi Fukuoka, Nao Kuniyoshi , 2017年10月
Proceedings of the 13th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows , 1 - 6
-
Interaction between Unsteady Supersonic Jet and Vortex Rings
K. Kitazono, H. Fukuoka, N. Kuniyoshi, M. Yaga, E. Ueno, N. Fukuda, T. Takiya , 2016年09月
International Journal of Mechanical and Mechatronics Engineering , Vol.10,No.10 , 1794 - 1798